Home
Science
I.T.
Arts

Laser Processing of Refractory Metal - Refractory Carbide Alloys  


Abstract Category: Engineering
Course / Degree: Master of Science
Institution / University: University of Tennessee, United States
Published in: 2008


Thesis Abstract / Summary:

The objective of the present study was to laser process a refractory metal – refractory carbide alloy based on W-Ti-C ternary system for severe service applications. The key concept was to cast a eutectic alloy of tungsten and titanium carbide/carbonitride straight from the melt through laser materials processing route. In the present study, a W-Ti-C ternary alloy has been laser processed into three-dimensional objects and surface protective coatings. Two novel fabrication systems were designed to build three-dimensional objects, namely tower nozzle solid freeform fabrication system and axis-symmetric laser powder deposition system. W-Ti-C alloy based protective coatings were deposited on graphite substrates, through laser melting of pre-placed powder mixture, to widen the use of carbon structural elements for high temperature applications. A method for depositing W-Ti-C alloy on steel using multi-intermediate layers strategy is discussed and the preliminary results are presented in this study.


Thesis Keywords/Search Tags:
materials science, laser, refractory, rocket nozzle, high temperature materials

This Thesis Abstract may be cited as follows:
Rajput D., "Laser Processing of Refractory Metal - Refractory Carbide Alloys.", Masters Thesis, The University of Tennessee - Knoxville, 2008


Submission Details: Thesis Abstract submitted by Deepak Rajput from United States on 23-Nov-2008 06:19.
Abstract has been viewed 3256 times (since 7 Mar 2010).

Deepak Rajput Contact Details: Email: drajput@gmail.com



Disclaimer
Great care has been taken to ensure that this information is correct, however ThesisAbstracts.com cannot accept responsibility for the contents of this Thesis abstract titled "Laser Processing of Refractory Metal - Refractory Carbide Alloys". This abstract has been submitted by Deepak Rajput on 23-Nov-2008 06:19. You may report a problem using the contact form.
© Copyright 2003 - 2024 of ThesisAbstracts.com and respective owners.


Copyright © Thesis Abstract | Dissertation Abstracts Thesis Library 2003-2024.
by scope.com.mt @ website design